Troubleshooting • RPI 4b not booting from SD Card.
Pi doesnt boot from sd card. Used 2 different sd cards same problem. I am doing it mostly on headless mode. Red power led solid light. Green led flashes once (it is quite fast, not blinking but just...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • Linux PWM GPIO (Kernel-managed GPIO on...
I've been testing a patch for a GPIO PWM kernel driver, which provides PWM on arbitrary GPIO pins, and it's very promising- https://lore.kernel.org/linux-pwm/20240 ... t@gmx.net/Here's gpiozero with...
View ArticleAdvanced users • Read custom config file into bashrc
Would it be possible for someone to read a web address from the text file saved in documents and use thewebaddress in bashrcchromium-browser --kiosk thewebaddressWhat would be the syntax to reference...
View ArticleCompute Module • No soundcard found
Hi team,I am using cm4 with buster os, but i am facing some time no audio issue --- no sound card found -- is coming but after hard reboot it is becoming correct, but again it is happening some time...
View ArticleGeneral programming discussion • C# on a raspberry Pi?
Hey Forum, I am about to embark on a cheeky little raspberry pi project. I can code in C#. I have read that it is possible to get a C# application running on raspberry PI5 with C#. Has anyone had any...
View ArticleTroubleshooting • Raspberry Pi 5: Netac NV2000 AER errors when forcing PCIe...
My Pimoroni PIM700 came with a NVMe Base and a 512GB Netac NV2000. With the default PCIe Gen 2 setting, there were no Advanced Error Reporting (AER) messages in the output of $journalctl -b. With the...
View ArticleBeginners • Bluetooth Keyboard w/ touchpad not connecting on OS boot
Hi All,I searched through the forums and other sources looking for a solution.I am definitely a beginner, I am using my old Raspberry Pi 2B to turn it into a portable cyberdeck.Also am going to learn...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • 30pin EDP to dsi
Hello all,I have a touch LCD screen with a 30pin EDP connector (from what I found). Unfortunately I can't find a pinout, and even if I did, it's been a while since I've tinkered with electronics.What...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • MIPI CSI-2 output
The RP1 chip contains MIPI CSI-2 input, and MIPI DSI output. Is there any way to drive MIPI CSI-2 on the output instead of DSI? I'm looking for a way to use the Raspberry Pi to drive MIPI CSI-2 data...
View ArticleAdvanced users • RPi5B cannot boot vanilla kernel with uboot but RPi4B boots...
I am running Arch ARM on a RPi4B and also on a RPi5B. My RPi4B can boot the vanilla kernel package (linux-aarch64) with the latest uboot-raspberrypi (2024.04-rc2) just fine. Yet, if I take that uSD...
View ArticleClik here to view.
Raspberry Pi OS • Program that saves text to the clipboard when copied
I usually use KDE Plasma5 and use the klipper program very often. This will save the text and commands I highlighted to the clipboard and I can easily select that text later.I had used Diodon on...
View ArticleAdvanced users • raspbery 3b+ usb port issue
If the sd card is reading then the usb won't work (no power is supplied to pp21). if we remove the sd card then i can see usb port is working (5v supplied to pp21)Statistics: Posted by Nikhil123ll —...
View ArticleTroubleshooting • Mounting usb hard drive at boot completed too late, Pi4B,...
Hi all,I recently upgraded from stretch to Bullseye. On stretch I didn't have this problem, but on bullseye mounting a usb hard drive completes too late.From syslog (from where I think is a...
View ArticleClik here to view.
General discussion • Running a two programs with Raspberry Pi 4 and Pico
Hello,I am working with the raspberry pico W and the Raspberry Pi 4 model B. I was wondering if there was a way to run one program on the pico and a separate one on the Pi 4. The two programs would be...
View ArticleAdvanced users • BCM54213PE cable testing
Follow-up to viewtopic.php?p=1958998The ethernet PHY on the RPI4 and 5 is apparently the BCM54213PE. The datasheet for this part claims:"The BCM54213PE features CableChecker™ diagnostics, which...
View ArticleTroubleshooting • Problem with Picamera2 and Camera V3 in Bulleseye
HI. I have a Raspberry Zero2w with Bulleseye OS installed from scrach. A PI Camera V3 is connected to the PI.My problem is that i cannot record 2 videos successively. here is a very simple script for...
View ArticleClik here to view.
Troubleshooting • Pi5: Ethernet/Power over USB-C
First post here. By the way, you CANNOT create an account here using a mobile device. VERY frustrating...I have power working from my iPad Pro to my pi5, but I cannot seem to coerce my pi5 to provide...
View ArticleRaspberry Pi OS • Device driver source and kernel object modules
where should device driver source and kernel object modules be stored? This is for user generated modules.Statistics: Posted by wkeeling — Mon Feb 19, 2024 8:43 pm — Replies 0 — Views 24
View ArticleGeneral discussion • Decibel Notification
Sound Monitor w/ notificationHi all,I'm wondering if any of you could help. I'm a complete novice but wanting to see if what I would like to do is even possible.I would like to be able to install some...
View ArticleGeneral discussion • Revisiting the Pi after many years
I've decided to setup a Pi-Hole and dug out an old Raspberry Pi that I had not used for several years.Surprisingly it still boots, although I will re-install the latest OS.After writing the latest...
View Article