Troubleshooting • Keyboard layout not changed despite setting localization...
I have a Raspberry Pi 5 with an SSD running a fresh installation of Debian GNU/Linux 12 (bookworm) and am unable to change the keyboard away from en_GB for a second account. 1) I used the RPi-Imager...
View ArticleCompute Module • CM5: Why are the test points tinned?
When comparing CM4 and CM5 I noticed that the testpoints on CM4 have their original ENIG surface while the CM5 testpoints have solder on them. What is the reason for this.Background: I'm designing a...
View ArticleCompute Module • CM5: USB-C as self-powered device
Hi;I'm designing a custom CM5 IO board. The original one is powered through the USB-C port and acts as a bus-powered device when using USB boot mode. My own board needs to be self-powered, however.How...
View ArticleTroubleshooting • Rpi5 + hailo 8 13tops And camera imx709 not work libcamera-...
Hi i need help with rpi imx708nV3 wide no detect camera why? In slot 0 connected no camera avaiable what with this thank you not can attach png photos So camera Is right connected i using recomended...
View ArticleBeginners • Ackerman chassis kinematic model
1. Ackerman StructureThe Ackerman steering structure chassis is similar to a real car chassis. The front two wheels of the chassis are used to control the direction of the car's movement, and the rear...
View ArticleBeginners • Rpi5 + hailo 8 13 tops,camera imx709 V3 wide not work
Hi i need help with rpi imx708nV3 wide no detect camera why? In slot 0 connected no camera avaiable what with this thank you not can attach png photos So camera Is right connected i using recomended...
View ArticleHATs and other add-ons • Is PineBoards.io no more? Where to go for RPi5 PoE+...
Pardon me if this is a bit vendor-specific, but I am seeing that https://pineboards.io shows a shopify "Store Unavailable" placeholder. I had really good experience with PineBoards.io products because...
View ArticleBeginners • Switch language VNC
Hello everyone! I use raspberry pi 5, problem with switching button layout. I connect to pi via vnc, I need to use Russian and English layout. But only the layout specified in the keyboard parameters...
View ArticleTroubleshooting • Raspberry PI 5 and Audio Amplifier Shield Power Supply
Hi,I am using a Raspberry PI 4 with a Hifiberry AMP2 today and it works really well.I have now tried to use the Raspberry PI 5 together with a IQAudio Digiamp+ but have ended up in the common RPI5...
View ArticleDevice Tree • Reduce the delay between SPI CS line and SPI CLK
I am facing the same issue as mentioned in the below link : https://github.com/raspberrypi/linux/issues/4567I am using Raspberry Pi 5 and 64 bit Bookworm OS.Based on the information I have gathered...
View ArticleTroubleshooting • PIO UART implementation in rp2040
HELLO There,I'm usiong rp2040 in my project. There are two UARTs implemented. I'm using uart_getc() and uart_putc() functions for Rx n Tx respectively. But this is working only with one of the uart...
View ArticleDevice Tree • i2c-sensor overlay - clarification on 'i2c-bus' parameter needed
Trying to use the in-tree overlay for stating a sensor on I2C-6Can someone please tell me what I'm doing wrong? Code: dtoverlay=i2c-sensor,i2c-bus=i2c6,mpu6050,int_pin=6i2c-busses overlay support...
View ArticleGeneral discussion • GUI interface
Dear Team,I wanted to play audio with GUI interface support with button using python script in Raspberry PI 3 B+ Model H/W board. Can anyone give me some references how to play audio with UI interface...
View ArticleBeginners • Connecting a Gyroscope sensor to Raspberry Pi 4
Good morning,I want to connect this sensor https://it.farnell.com/analog-devices/a ... P-STM72189 to my Raspberry Pi 4. Do you know how it is possible to connect it to the Raspberry? I saw also this...
View ArticleGeneral discussion • Get max temperature the easy way
Code: vcgencmd measure_temp gives the actual temperature of the CPU.What I always miss is a simple way to get the max temperature that my Pi reached since last boot.Isn't it a good idea to let...
View ArticleOff topic discussion • Raspberry pi zero 2w POWER OUT
Hello I Have Raspberry pi zero 2WWhat ifElectricity goes outWhile my raspberry pi is runningIt always happens to me when it rains on PhilippinesData are backup on 5 sdcardsStatistics: Posted by...
View ArticleTroubleshooting • Please, I need your help about CM4 operation
I'm a hardware engineer & team leader for designing the circuit & Artwork.Now I have been designing the Some product using Raspberry pi CM4, and I design & had a first board refer to CM4...
View ArticleGeneral • RP2350 Abracon inductor - what is the right orientation?
Hi, Im trying to get my own RP2350 dev board. I'm going back and forth with JLCPCB because they are asking me to confirm the orientation of the specialized inductor that the datasheet strongly...
View ArticleSDK • QSPI pad settings
If I look at the default pad settings for the QSPI pins I see pull downs on CLK, SD0 and SD1 (0x56) but pullups on SD2 and SD3 (0x5A). Can anyone explain the reasons? ThanksStatistics: Posted by...
View ArticleCamera board • Raw Image Bit Depth Scaling on Raspberry Pi 5 vs Pi 4
I'm encountering an issue with raw image capture using a camera sensor. On my Raspberry Pi 4 setup (rpicam-apps v1.5.2 and libcamera v0.3.2), the raw (.dng) images have 10-bit pixel values (0–1023),...
View Article