Hello,
New to the forum and Pi. I recently purchased a few Pies; 02W, 4B, and a troublesome 5.
The first two seem to work fine, but the pi 5 hasn't booted up once. I really wanted this one to work because I also got an NVMe hat and SSD. (not currently installed).
LED Indicators:
Red - Solid
Green (looks yellow to me) - 4 long, 5 short, repeating i.e. ". . . . ....."
If you have a PI5
You can try to boot without and SD-Card (or other boot media) in place, as then you will get a boot diagnostic screen.
I haven't gotten a screen in any iteration of powering this on. I figured there's either something I'm rushing through and missing or it's defective / damaged.
Troubleshooting advice or thoughts on what to do next?
New to the forum and Pi. I recently purchased a few Pies; 02W, 4B, and a troublesome 5.
The first two seem to work fine, but the pi 5 hasn't booted up once. I really wanted this one to work because I also got an NVMe hat and SSD. (not currently installed).
LED Indicators:
Red - Solid
Green (looks yellow to me) - 4 long, 5 short, repeating i.e. ". . . . ....."
- The pi 5 is from a Canna kit starter pack.
- Using the included power supply cable.
- Have tried 3 or 4 different SD cards at this point and with or without an SD I receive the same LED output, and have not once had a signal to HDMI.
- Using Raspberry Pi imager. Standard 64 bit option.
- Tried on two different monitors. (4k, and 1080).
If you have a PI5
You can try to boot without and SD-Card (or other boot media) in place, as then you will get a boot diagnostic screen.
I haven't gotten a screen in any iteration of powering this on. I figured there's either something I'm rushing through and missing or it's defective / damaged.
Troubleshooting advice or thoughts on what to do next?
Statistics: Posted by piohmy — Sat Dec 21, 2024 3:55 pm — Replies 2 — Views 59